4 Axle 80 Tons Low Bed Trailer Delivery To Ghana
January 25, 2022
TRUCKMAN AUTO can produce nearly 400 sets of low bed semi trailers a year, which are
mainly exported to Senegal, Ghana, DRC, Mozambique, South Sudan and other countries.
Mainly include 3 axle low bed trailer, 4 axle low bed trailer and multi-line multi-bridge low bed trailer.
This low bed trailer exported to Ghana this time was purchased by our old customer.
This semi-trailer is mainly used for the customer's rental equipment business. Due to
the local requirements on the weight of semi-trailers, we have upgraded the semi trailer,
turning the 3 axle into a 4 axle, which not only improves the carrying capacity but also
meets the requirements of local traffic regulations. In addition, 500mm wide support plates
are added to both sides of the semi trailer to meet the transportation requirements of
large-sized machinery, as shown in the figure:
Why Choose The TRUCKMAN AUTO Brand Low Bed Trailer ?
The main material of TRUCKMAN AUTO low bed trailer use the Q355 high strength steel material,
instead of Q235 carbon steel. The Q355 high strength steel advantage as follow:
A. The yield strength of Q355 steel can reach 355MPa, while the yield strength of Q235 steel is only 235MPa.
B. The purchase cost of Q355 steel is 2 times that of Q235 steel, but the bearing capacity and service
life are 5 times that of Q235 steel.
C. Q235 is just an ordinary steel plate, not a high strength plate. It is only suitable for some simple semi
trailer cargo boxes, such as the fuel tank trailer tank body. For flatbed trailer cargo box,
we suggest use the Q355 high strength steel.
Q235 Carbon Steel Q355 High Strength Steel
Q355 Steel Chemical Composition:
NO | C | Si | Mn | P | S | Cr | Ni | Cu |
≤ | 0.24 | 0.55 | 1.60 | 0.035 | 0.035 | 0.30 | 0.30 | 0.40 |